Taylor Rental

2510 S KERR BLVD
Sallisaw, OK 74955
918-776-0796

Air Tools & Accessories

hitachifinishnailer

16-Gauge Finish Nailer with Integrated Air Duster

Description: 
Fastener Type16-Gauge Finish Magazine AngleStraight Fastener Length Capacity1"- 2-1/2" Fastener Diameter Range16-Gauge Magazine Capacity100 Magazine LoadingTop Operating Pressure70 -120 psi Jam ClearingTool-Less ActuationSelective (Sequential/Bump Fire) Tool Length11-5/8" Tool Width2-27/32" Tool Height10-7/8" Tool Weight3.7 lbs GripRubber
Manufacturer: 
Hitachi

Rates

4 hours
$14.00
Daily
$20.00
Weekly
$60.00
Monthly
$180.00

3/4" X 50' Air Hose

Rates

Daily
$1.00
Weekly
$7.00

5 gal Air Tank

Rates

Daily
$5.00
Weekly
$15.00
Monthly
$45.00

Air ram Ergonomic Scaler

Description: 
Ergonomic design lets operator stand upright eliminating backaches, High-strength tubular handle and soft foam hand grips for operator comfort, Quick-change, hardened steel tool chuck accepts dozens of accessories, Requires only 6-8 CFM at 80-90 PSI
Manufacturer: 
Edco

Rates

4 hours
$42.00
Daily
$59.00
Weekly
$236.00
Monthly
$944.00
Big-Stick

Big Stick Air Ram Scalers

Description: 
High-strength tubular handle and soft foam hand grips for operator comfort, Extra large piston for harder hitting action, Quick-change hardened steel tool chuck accepts Big Stick accessories, Requires 12-15 CFM at 90 PSI
Manufacturer: 
Edco

Rates

4 hours
$41.30
Daily
$59.00
Weekly
$276.00
Monthly
$1104.00
floorgunair

Floor Gun Air Powered

Description: 
Preferred Seating System Pneumatic Flooring Nailer Designed for use with either T Porta-Nails in sizes 2", 1 1/2" and 1 3/16" and L Porta-Nails in sizes 2" and 1 1/2" Designed for nailing 1/2" and 3/4" thick tongue and groove flooring Holds up to 150 T or L Porta-Nails Comes ready to blind nail through the tongue of the floor Mallet activated to ensure the tightest floor possible Ruggedly build to provide durability throughout years of use Like all Porta-Nails products, the Hammerhead TL is built to the highest quality standards - in fact, it is ISO 9001-2000 certified. Package comes with the Portamatic Hammerhead TL pneumatic nailer, mallet, wrenches, pneumatic lubricant, safety goggles, and accessory shoe pad for nailing �" flooring.
Manufacturer: 
Porta-Nail

Rates

4 hours
$21.00
Daily
$30.00
Weekly
$90.00
Monthly
$270.00
floorgunmanual

Floor Nailer Manual

Description: 
402 Porta-Nailer, extension handle, mallet, accessory shoe for face nailing, accessory shoe for nailing 3/8" - 9/16" flooring, nail set, video, wrenches, and rugged carry case.
Manufacturer: 
Porta-Nail

Rates

4 hours
$17.50
Daily
$25.00
Weekly
$75.00
Monthly
$225.00
NR83AA3nailer

Framing Nailer, Clipped Head, Paper Strip Collati

Description: 
Fastener TypeClipped Head, Paper Strip Collation Magazine Angle34 Degrees Fastener Length Capacity2" - 3-1/4" Fastener Diameter Range.113 to .131 Magazine Capacity86-94 Magazine LoadingRear Air Inlet3/8" Operating Pressure70-120psi Air Consumption.088 (FT3/Cycle@100psi) Jam ClearingOpen Nose Depth SettingNo ActuationSelective(Sequential/Bump Fire) L x W x H18-1/8" x 4-1/4" x 14-3/16" Weight8.4lbs
Manufacturer: 
Hitachi

Rates

4 hours
$18.00
Daily
$26.00
Weekly
$78.00
Monthly
$234.00

Ground Rod Driver 1 1/8"

Description: 
Jackhammer tip

Rates

Daily
$10.00
Weekly
$30.00
Monthly
$90.00
hitachiroofingnailer

Roofing Nailer, Coil, Wire Collation -Side Load

Description: 
Fastener Diameter Range0.120 Magazine Capacity120 Magazine LoadingSide Air Inlet3/8" Operating Pressure70-120psi Jam ClearingOpen-nose Depth SettingTool-Less ActuationContact, Sequential Optional L x W x H 9-27/32" x 4-5/8" x 10-3/8" Tool Weight5.5 lbs Fastener TypeCoil, Wire Collation Magazine Angle16-Degrees Fastener Length Capacity7/8" to 1-3/4"
Manufacturer: 
Hitachi

Rates

4 hours
$18.00
Daily
$26.00
Weekly
$78.00
Monthly
$234.00

Texture Spray gun / hopper

Rates

Daily
$20.00
Weekly
$60.00
Monthly
$120.00

Trim & Flooring Stapler:

Description: 
3/8" & 1/2" Wood/Laminate Flooring Versatile hardwood flooring tongue and groove stapler Precise � drives staples at 45 degree angle every time Lightweight, easy to handle 1/4" crown 1" 18 gauge galvanized staples
Manufacturer: 
Portamatic

Rates

4 hours
$14.00
Daily
$20.00
Weekly
$60.00
Monthly
$180.00